Special Bolt Head Trimming and Stamping Dies

More introduction

    One of the screw-formed tools, trimming die is used to form the head or f screw. Square, hexagon and octangle are the common trimming die types.
    Trimming die is used to making hex or square head bolt to form the head shape. There are many kinds of material for choice like M2 or M35 etc. In order to extend the lifetime, surface Tin/TiALN-coated is considerable.
    Trimming dies are promptly used in industry to trim the heads of bolts & screws of different shapes by removing distorted, undesirable angular part and sizes of high precision. It leads to create innovative product of perfect sizes and precision without having process of unnecessary resizing that wastes not only money but time also leaving behind more wastage. We are highly in making these kind of high tech dies of best performance with very low and competitive rate.
   The manufacture of cutting and trimming dies with different profiles is carried on high precision grinding centres, high-speed machining centres, wire and electrode EDM and CNC lathes for hard lathing (steel and carbide)
based on Henghui's technology. The technical department will help selecting the most suitable steel or carbide tool for the material to be cut.

Please indicate the diameter & height and across flat when inquire or order. Or you can send us the drawing.

 

 Advantage 

Advice on carbide and steel grades for different applications.

Perfect tangent radius.

Mechanical Processing surfaces when it is geometrically possible.

Large number of shapes with very high geometric complexity.

Coating, the most suitable for the materials to be cut.

Mirror polishing before and after coating.

± 0.005 mm tolerances.

Competitive prices.

Products show




Packaging



 

More introduction

    One of the screw-formed tools, trimming die is used to form the head or f screw. Square, hexagon and octangle are the common trimming die types.
    Trimming die is used to making hex or square head bolt to form the head shape. There are many kinds of material for choice like M2 or M35 etc. In order to extend the lifetime, surface Tin/TiALN-coated is considerable.
    Trimming dies are promptly used in industry to trim the heads of bolts & screws of different shapes by removing distorted, undesirable angular part and sizes of high precision. It leads to create innovative product of perfect sizes and precision without having process of unnecessary resizing that wastes not only money but time also leaving behind more wastage. We are highly in making these kind of high tech dies of best performance with very low and competitive rate.
   The manufacture of cutting and trimming dies with different profiles is carried on high precision grinding centres, high-speed machining centres, wire and electrode EDM and CNC lathes for hard lathing (steel and carbide)
based on Henghui's technology. The technical department will help selecting the most suitable steel or carbide tool for the material to be cut.

Please indicate the diameter & height and across flat when inquire or order. Or you can send us the drawing.

 

 Advantage 

Advice on carbide and steel grades for different applications.

Perfect tangent radius.

Mechanical Processing surfaces when it is geometrically possible.

Large number of shapes with very high geometric complexity.

Coating, the most suitable for the materials to be cut.

Mirror polishing before and after coating.

± 0.005 mm tolerances.

Competitive prices.

Products show




Packaging



 

Granulation Equipment:

Our dry granulators/roller granulator are suitable for granulating and pelleting dry material whose humidity is below 10%.

1.1 Fertilizers: potassium sulphate (SOP), NPK compound fertilizers etc.

1.2 Chemical material: snow melt agent, antioxidant, fire retardant, cement retarder etc.

1.3 Construction material: all kinds of gypsum, e.g. desulfurized gypsum, phosphogysum etc. Gypsum pelletizer is our featured machine.

2. Output, size and shape

2.1 Small size and irregular shape: min.output is 200 kgs/h and max. is 4500 kgs/h, granules size is on request.

2.2 Big size and oval shape: min. output is 3,000 kgs/h and max. is 12,000 kgs/h, pellet size is on request.

Please note that size is bigger, output is higher.

3. Granulating theory

Two rollers rotate in reverse, materials between rollers are extruded. They are not smooth surface rollers.

By using the crystallization water in the materials, the equipment can directly make the powder materials into the grains. It is a kind of new equipment. The structure is rational. The machine is stable and reliable in the performance and easy in maintenance.
The grains to be made can be used for pressed pills, instant soluble agent, capsule and etc. The machine is mainly used for the grain making in pharmacy, food, chemical and other industries and it is suitable for the grain making for which the wet method can not settle it.

Dry Roller Granulator

Dry Roller Granulator, Dry Roller Pressing Granulator, Dry Roller Granulation Machine

Changzhou Ruide Drying Engineering Technology Co., Ltd , http://www.rddryer.com